This beautiful Kaspar Schulz 30 hectoliter brewery was installed in 1998. It could be any brewer's dream brewery. It has been only lightly used for about 6 years and is in very good condition. It features a three vessel decoction mash brewhouse with stainless steel, copper clad domed vessels, vapor heat recovery, semi-automatic mimic panel process control (easily automated), and a large capacity cellar with lots of storage capacity and 2 bright beer tanks built for 3 bar pressure. A perfect no-compromise plant for the aspiring or growing brewer who specializes in continental beer styles, or well suited to a combination of ales and lagers. It remains in place as installed and will be professionally disassembled and shipped to the buyer. It may be inspected as shown at its present location overseas.
List of content:
Malt milling system
-bag malt intake device
-conveyor, made by Sauer/Germany (Motor: 2,2 KW)
-malt mill, made by Kuenzel, 250 kg/h (400 V 60 Hz, 3,0 KW)
-grist case
-conveyor to mash kettle
Brewhouse Unit (Size:2.4x5.9m, 4.9m h to top of motor assembly), fully automated, set on stainless steel frame, designed for 30 hl cast out wort/ brew, contains:
a.)Mash/ wort kettle, completely made of stainless steel, insulated
- copper cladded
- pre masher
- agitator, drive (400V, 60Hz, 1,4 KW)
- internal boiling system
- sensors: temperature, volume, overboil
- steam valves
- CIP sprayballs
- illumination (24V)
b.) mash/ wort pump, frequency regulated (230 V 60Hz, 1.5 KW)
c.) lauter pump (230V 60Hz, 0,25 KW)
d.) all piping in stainless steel
e.) sanitary hand and pneumatic valves
f.) Lauter tun, complely made of stainless steel, insulated
- copper cladded
- milled false bottom made of stainless steel
- false bottom rinsing device
- CIP sprayballs
- illumination (24V)
- raking and spent grain removal device
- spent grain pump
- sight glass lauter tun
- sparging device
g.) sampling station
Whirlpool unit, set on stainless steel frame (2,1W x 4,9L x 2,2H)
a.) Whirlpool, made of stainless steel, including tangential inlet, 2 outlets
CIP sprayballs, sludge discharge
b.) Plate heat exchanger for hot wort. Type: 2 stage (city water/ice water)
c.) Plate heat exchanger for vapor, including ice water pump (0,55KW),
ventilator
d.) CIP Tank for hot caustic, insulated, steam heated
e.) CIP pump (4,0KW)
f.) Cast out pump from Whirlpool to PHE
g.) all piping and armatures
h.) aeration device
Hot water tank, steam heated with hot water pump (5KW)
Flowmeter
5x Fermentation tank (cylindro conical)
made by Apparatebau Nordhausen, total content 3855 ltr, designed for 0,99
bar, jacketed and insulated, H= approx. 3955mm (+ 300 for PRV) Diam. approx.1550mm
2x Storage tank (cylindrical) made by H+E Technology, total content ~3000 ltr, jacketed and insulated H= app. 3500, Diam. approx 2000
5x Storage tank (cylindrical)
made by Apparatebau Nordhausen, total content 7350 ltr, designed for 0,99
bar, jacketed and insulated H= app. 3500mm, Diam. approx 2000mm
2x Storage tank (cylindrical) total content 3158 ltr, designed for 3,0
bar, Kaspar Schulz, jacketed and insulated H= app. 3200mm, (+ 300 for PRV) Diam. approx 1600mm
5x Storage tank (cylindrical)
made by Apparatebau Nordhausen, total content 3570 ltr, designed for 0,99
bar, jacketed and insulated H= approx. 3200 (+ 300 for sec. valve), Diam. approx. 1600
Control panel for tanks
Hilge cellar pump, 3,3 KW L 1200 w 400 h 900
Siphon filler L1200 w 400 h 1700
Note: 400v 60 hertz motors can be operated on 460v 60 hertz.
STRICTLY FULLY FUNDED INQUIRIES ONLY,
CONTACT VINCE COTTONE 360.705.8265
soundbrewing@gmail.com
HOME
.jpg)
